EmbeddedMarket.com lanuches All-in-one Development Board for AVR, 8051, PIC, ARM, Arduino

The All-in-one Development Board for AVR, 8051, PIC, ARM, Arduino called as EEDT6.0 (Embedded Engineers Development Tool 6.0) is now available in India & USA.

EEDT6.0 Product Page: http://embeddedmarket.com/products/Embedded-Engineers-Development-Tool-6-0/

EEDT6.0 in USA: http://microcontrollershop.com/product_info.php?products_id=3920

This product is made by EmbeddedMarket.com in Pune, India.





The EEDT6.0 has:

• Sec-1: Seven-Segment Display — Four multiplexed
• Sec–2: Variable resistance for Analog Input — Three separate presets
• Sec-3: Pulled down Push-to-On Switches — Eight switches
• Sec-4: Pulled up Push-to-On Switches — Eight switches
• Sec-5: Matrix keypad of 4x4 keys — Total 16 keys
• Sec-6: I2C-Based Real-time clock, EEPROM & Digital-to-Analog converter
• Sec-7: Socket for ATTiny13 and pin-compatible AVR microcontrollers
• Sec-8: Socket for PIC16F873A and pin-compatible PIC microcontrollers (PIC16F873A mounted)
• Sec-9: Socket for ATmega8 / ATmega168 and pin-compatible AVR microcontrollers
• Sec-10: Socket for PIC18F4550 / PIC18F452 and pin-compatible PIC microcontrollers
• Sec-11: 16x2 LCD Interface. LCD is mounted on the board. Same place can be used for 20x4 LCD
• Sec-12: Pre-soldered ARM7 LPC2138 microcontroller
• Sec-13: Socket for P89V51RD2 (8051 family) microcontroller or for ATmega8515 AVR and pin-compatible microcontrollers. Set Reset pin Jumper to Vcc when using 8051 family microcontroller; Set it to Gnd for AVR.
• Sec-14: High Current Driver based on ULN2803 — Use it to drive stepper motors and seven-segment displays
• Sec-15: Socket for ATTiny2313 and pin-compatible AVR microcontrollers
• Sec-16: Socket for ATTiny26 and pin-compatible AVR microcontrollers
• Sec-17: Socket for ATmega16 / ATmega32 / ATmega8535 and pin-compatible AVR microcontrollers (populated with ATmega32)
• Sec-18: Implementation of Arduino Duemilanove platform
• Sec-19: DC Motor driver using L293D
• Sec-20: Bank of 8 LEDs
• Sec-21: SPI EEPROM AT93C46
• Sec-22: Collection of sensors and other interfaces — Temperature sensor, Light sensor, Infrared (IR) sensor, 38KHz IR receiver, IR Transmitter, Buzzer
• Sec-23: USB-to-TTL converter interface — This is used for Arduino as well as a standalone USB-to-TTL interface. Jumper settings required.
• Sec-24: Micro SD Card — Can be interfaced with 3.3V I/Os or with 5V I/Os. Jumper settings required.
• Sec-25: ENC28J60-based Ethernet interface. Use it to create web-enabled applications.
• Sec-26: RS232-to-TTL converter interface.
• Sec-27: Power supply section which includes 5V and 3.3V regulation. Wall-mount DC adapter that can source 500mA or higher at 9V DC is suitable. Exceeding input voltage may heat the onboard Voltage regulator ICs.